Key Features:

Range: 0-3.1mm | Sensitivity: -7.87V/mm

Response: 0-10kHz | Resolution: 0.1μm

Output: -2 to -18V DC (linear to gap)

Robust Construction:
✓ 8mm probe (M10×1 thread)
✓ 316 stainless steel housing
✓ IP67 protection
✓ -30°C to +120°C operation (180°C with HT cable)

Optimal Use:
• Requires AISI 4140 steel target (≥12mm)
• 5m integral cable
• -24VDC power

Applications:

Turbine/compressor monitoring

Rotor position measurement

Bearing health analysis

Compatibility:
• EPRO MMS6000 systems
• CE/RoHS certified

Core Specifications:
▸ Range: 0-2mm | High Sensitivity: -20V/mm
▸ Ultra-Fine Resolution: 0.01μm
▸ Wide Bandwidth: DC-10kHz
▸ Micro Probe: 5mm diameter (M8×0.75 thread)

Robust Design:
✓ 316 stainless steel housing
✓ IP67 environmental protection
✓ -30°C to +120°C operation (180°C with HT option)

Key Applications:
• High-speed turbine vibration monitoring
• Precision rotor displacement measurement
• Micro-vibration analysis in critical machinery

Integration:

Compatible with EPRO MMS6000 systems

-24VDC powered (5m integral cable)

Key Features:

Range: 0-10mm | Sensitivity: -8.0V/mm

Output: -2 to -18V DC (linear to gap)

Frequency Response: 0-10kHz

Robust Design: 316SS housing, IP67 protection

Temp Range: -30°C to +120°C (180°C with HT cable)

Applications:
✓ Shaft vibration monitoring
✓ Rotor position measurement
✓ Bearing condition analysis

Compatibility: EPRO MMS6000 systems

Key Features:
✔ Wide Range: 0–10 mm measurement
✔ High Sensitivity: –0.8 V/mm (optimized for steel targets)
✔ Fast Response: 0–10 kHz frequency range
✔ Robust Build: Stainless steel housing, IP67 protection
✔ Extreme Temp: Operates from –30°C to +120°C (up to 180°C with HT cable)

Applications:

Turbine/compressor shaft vibration monitoring

Rotor position and axial displacement measurement

Bearing condition analysis in critical machinery

(Compatible with EPRO MMS6000 systems. Requires proper gap calibration.)

Key Features:
Measurement Range: 0-3.0mm

Sensitivity: -7.87V/mm (optimized for steel)

Output: -2 to -18V DC (linear to gap)

Frequency Response: 0-10kHz

Robust Design: 316 stainless steel, IP67 rated

Temp Range: -30°C to +120°C (extendable to +180°C)

Applications:
✓ Turbine/compressor shaft vibration
✓ Rotor position monitoring
✓ Bearing condition analysis

Compatible with EPRO MMS6000 systems. Requires proper gap calibration.

Key Features:
✔ Range: 0–3.0 mm (non-contact measurement)
✔ Sensitivity: –7.87 V/mm (optimized for steel targets)
✔ Output: –2 to –18 V DC (linear to gap distance)
✔ Robust Build: 316 stainless steel, IP67 protection
✔ Temp Range: –30°C to +120°C (up to +180°C with HT cable)
✔ Frequency Response: 0–10 kHz (ideal for dynamic vibration)

Applications:

Turbine/compressor shaft vibration monitoring

Rotor position and bearing health tracking

Critical machinery protection systems

Key Features:
Measurement Range: 0–10 mm (factory calibrated)

Output: –2 to –18 V DC (linear to gap distance)

Sensitivity: –8.0 V/mm (optimized for steel targets)

Robust Design: Stainless steel housing, IP67 protection

Temperature Range: –30°C to +120°C (up to +180°C with HT cable)

Compatibility: Works with EPRO MMS6000 monitoring systems

Applications: Turbines, compressors, pumps, and critical rotating equipment requiring shaft vibration, radial/axial position, and rotor dynamics monitoring.

Key Features:
Measurement Range: ±50 g (±500 m/s²)

Wide Frequency Response: 0.5 Hz – 10 kHz

Output: 4–20 mA (loop-powered) or voltage signal

Extreme Durability: Stainless steel housing, IP67 rated

Operating Temp: -40°C to +120°C (higher with cooling option)

Flexible Mounting: Threaded stud or magnetic base

Applications: Pumps, motors, fans & compressors in power, oil/gas & heavy industries.

Key Features:
Input: Accepts signals from inductive sensors or proximity probes (0.5 Hz–15 kHz).

Speed Range: Configurable up to 30,000 RPM with adjustable pulses/revolution.

Outputs: Relay alarms/trips (SPDT) + 4–20 mA / 0–10 V analog output.

High Accuracy: ±0.1% deviation for precise speed control.

Robust Design: Supports 24V DC or 110/230V AC, operates in -20°C to +70°C.

Safety Certifications: ATEX, SIL (optional for hazardous areas).

Applications: Turbines, compressors, pumps, and gearboxes requiring overspeed protection.

Key Features:
Measurement Range: 0–4 mm (typical)

Output: –2 to –18 V DC (proportional to gap distance)

Sensitivity: –7.87 V/mm

Robust Design: Operates in harsh conditions (up to 120°C)

Compatibility: Integrates with EPRO MMS6000 and other monitoring systems

Applications: Turbines, compressors, pumps, and rotating equipment protection.