Model Foxboro FBM217 Module Type Analog Output (AO) Number of Channels 8 independent, isolated output channels. Output Signal 4 to 20 mA DC, user-scalable, per channel. Resolution 16-bit (high resolution for precise control). Accuracy Typically ±0.05% of full scale at 25°C (77°F). Load Capacity 0 to 750 Ohms (maximum loop resistance). Update Rate Configurable, typically every 40 to 70 milliseconds for all channels. System Compatibility Foxboro I/A Series DCS. Must be installed in a compatible FBM fieldbase (e.g., FBM200 series). Power Supply Powered by the fieldbase (typically +5V and ±12V from the power supply module). The 4-20 mA output power is sourced from the module (sourcing output). Isolation Channel-to-Channel: Yes, channels are isolated from each other. Channel-to-Bus: 500 V AC minimum. Redundancy Supports redundant (1:1) configuration. A primary and a backup FBM217 can be paired for critical control loops. Automatic switchover occurs upon failure. Diagnostics Includes comprehensive internal diagnostics for fault detection (e.g., module failure, communication loss, field short-circuit). LED Indicators Module status LEDs (e.g., OK, ACTIVE, FAIL) and often per-channel status indicators. Connections Field wiring is terminated to a removable screw terminal block on the associated fieldbase. Environmental Designed for industrial environments. Operating temperature typically 0 to 60°C (32 to 140°F).

Model Foxboro 873RS-AIPCGZ Type Absolute Pressure Transmitter Output Signal 4-20 mA DC analog with superimposed HART® protocol (digital) Power Supply 10.5 to 42 V DC (loop-powered, typical 24 V DC) Housing Rating Explosion-Proof / Flameproof - Class I, Division 1, Groups B, C, D (North America) - ATEX / IECEx: Ex d IIC T6 Gb (Europe / International) Enclosure Material Cast aluminum with a black epoxy finish. Sensor Technology Silicon Capacitive (High Accuracy) Performance / Accuracy ±0.1% of calibrated span (includes linearity, hysteresis, and repeatability). This is a high-accuracy version. Process Connection Typically 1/2" NPT female (or other as specified by "GZ" suffix). The "CGZ" code often includes 316L SST wetted parts. Pressure Ranges (URL) The "RS" indicates a specific range series. Common URL (Upper Range Limit) values are 100 inH₂O, 500 inH₂O, 1000 inH₂O, 3000 psi, etc. The exact URL is defined by the order code. Adjustable Span Up to 100:1 turndown from the sensor's Upper Range Limit (URL). Ambient Temperature -40°C to +85°C (-40°F to +185°F) Process Temperature -40°C to +120°C (-40°F to +248°F) (with standard fill fluid) Stability ±0.1% of URL per year for 10 years. Display Optional Local Operator Interface (LOI) can be mounted on the transmitter for local readout and configuration.

Model Foxboro FCM100ET Measurement Principle Coriolis Mass Flow Primary Measurements - Mass Flow - Density - Temperature Derived Measurements - Volume Flow (inferred) - Percent Solids / Concentration - API Gravity, %Brix, etc. Outputs - Dual 4-20 mA analog outputs (user-configurable for mass flow, density, etc.) - Pulse/Frequency Output (for totalization or batch control) - Digital Communications: HART® protocol (standard), Foundation Fieldbus, or PROFIBUS PA (options) Power Supply Standard: 10.5 to 42 V DC (loop-powered for 4-20 mA) With digital comms (e.g., Fieldbus): 9 to 32 V DC Housing Rating Explosion-Proof / Flameproof - Class I, Division 1, Groups B, C, D (North America) - ATEX / IECEx: Ex d IIC T6 Gb (Europe / International) Enclosure Material Cast aluminum with epoxy paint Process Connections Varies based on the paired flow tube sensor (e.g., flanged, threaded, sanitary). The transmitter itself has conduit entries. Accuracy (Typical) - Mass Flow: ±0.10% of rate (liquid), ±0.25% of rate (gas) - Density: ±0.0005 g/cm³ (±0.5 kg/m³) - Temperature: ±1°C (±1.8°F) Ambient Temperature -40°C to +85°C (-40°F to +185°F) Display Optional local operator interface (LOI) available for configuration and readout.

Product Type Smart Gauge Pressure Transmitter Output Signal 4-20 mA analog with HART Protocol (Rev 5/6/7) digital overlay Power Supply Loop-Powered (2-Wire). Operating Voltage: 12.5 to 36 V DC (Nominal 24 V DC). Measurement Type Gauge Pressure (Psig) Range Code (22) Must be confirmed via official range tables. For an IGP10 transmitter, 22 often corresponds to a range of 0-400 psi (0-27.6 bar). This is the most critical parameter to verify. Accuracy Typically ±0.1% of calibrated span (includes combined effects of linearity, hysteresis, and repeatability). Wetted Parts Diaphragm: Tantalum Flange: 316L Stainless Steel O-Rings: Viton® (Standard) or Kalrez®/FFKM (Option) Process Connection C1: 1/2" NPT Female Electrical Connection Not specified in model. Default is typically a 1/2" NPT conduit entry with a separate connection option code. Local Display None (Standard). An optional LCD indicator is available (would be denoted in model number, e.g., /M1). Ambient Temperature -40°C to 85°C (-40°F to 185°F) Process Temperature -40°C to 120°C (-40°F to 248°F) Protection Rating IP67 / NEMA 4X Safety Certifications Typically certified for hazardous areas by FM, FMc, ATEX, IECEx. Compliant with SIL 2/3 safety integrity levels. (Specific marks are on the product label).

product Type Smart Differential Pressure (d/p) Transmitter Output Signal 4-20 mA analog with HART Protocol digital overlay Power Supply Loop-Powered (2-Wire). Operating Voltage: 16 to 36 V DC (Nominal 24 V DC). Measurement Type Differential Pressure Range Code (B01) Must be confirmed via official range tables. For a d/p transmitter, B01 often corresponds to a range like 0-100 inH₂O (0-25 kPa) or similar. This is the most critical parameter to verify. Accuracy Typically ±0.1% of calibrated span (includes linearity, hysteresis, and repeatability). Wetted Parts Isolating Diaphragms: Tantalum (primary wetted part) Flanges: 316L Stainless Steel O-Rings: Viton® (Standard) or Kalrez®/FFKM (Option) Process Connection S1: Standard Flange Mount (e.g., with 1/4" NPT female connections on the flange). Mounting M1: With Integrated Mounting Bracket Electrical Connection L1: 1/2" NPT Conduit entry Local Display None (Standard). An optional LCD indicator is available. Ambient Temperature -40°C to 85°C (-40°F to 185°F) Process Temperature -40°C to 120°C (-40°F to 248°F) Protection Rating IP67 / NEMA 4X Safety Certifications Typically certified for hazardous areas by FM, FMc, ATEX, IECEx. Compliant with SIL 2/3 safety integrity levels. (Specific marks are on the product label).

Product Type Smart Pressure Transmitter (Likely Gauge Pressure) Output Signal 4-20 mA analog with HART Protocol (Revision 5, 6, or 7) digital overlay Power Supply Loop-Powered (2-Wire). Operating Voltage: 16 to 36 V DC (Nominal 24 V DC). Sensor Range (Code C01) Must be confirmed via official range tables. Example for a gauge pressure variant: 0-1.0 bar (0-15 psi). Note: The exact range is defined by the C01 code. Accuracy Typically ±0.1% of calibrated span (includes combined effects of linearity, hysteresis, and repeatability). Wetted Parts Diaphragm: Tantalum Flange: 316L Stainless Steel O-Rings: Viton® (Standard) or Kalrez®/FFKM (Option) Process Connection F1: 1/2" NPT Female Electrical Connection L1: 1/2" NPT Conduit Local Display None (Standard). An optional LCD indicator is available. Ambient Temperature -40°C to 85°C (-40°F to 185°F) Process Temperature -40°C to 120°C (-40°F to 248°F) Protection Rating IP67 / NEMA 4X Safety Certifications Typically certified for hazardous areas by FM, FMc, ATEX, IECEx. Compliant with SIL 2/3 safety integrity levels. (Specific marks are on the product label).

Brand: General Electric (GE) Model: IS200EDCFG1AED Series: MarkVI Manufacturer: GE Product Type: Excitation DC Feedback Board Fiber Type: Plastic or Hard Clad Quartz Product Usage: For use with EDCF boards The IS200EDCFG 1AED Feedback Board is a high quality product produced by General Electric, the world's leading manufacturer of industrial control systems. This feedback board is specifically designed to provide an accurate and reliable DC feedback signal in the GEMark VISpeedtronic family of systems. It uses advanced optical fiber technology to ensure the stability and accuracy of signal transmission.In addition, the feedback board uses durable plastic or hard quartz materials to maintain long-term stable performance in various industrial environments. Easy to install and maintain, it is an indispensable key component in industrial control system. The IS200EDCFG1AED feedback board can further improve the operation efficiency and reliability of the whole system by being used together with the EDCF board.

Brand: GE General Electric Model: IS200DSPXH1DBD Product Type: Digital Signal Processor Control Card Series: MarkVI Input Voltage: 220V Frequency: 50kHz Weight: 0.9 kg Certified Product: Yes The GEIS200DSPXH1DBD is a digital signal processor control card designed for industrial automation and is part of the GEMarkVI family. This control card uses advanced digital signal processing technology to provide excellent data processing capabilities to ensure stable and efficient operation of the system. It is designed to meet the needs of power, manufacturing, and other applications that require highly automated control.The control card has excellent anti-interference ability and high reliability, which can maintain stable operation in harsh working environment. In addition, it supports multiple interface standards for seamless integration with other devices. Through precise control algorithm, IS200DSPXH1DBD can realize precise control of complex systems and improve production efficiency and product quality.To ensure optimum performance, we recommend following the manufacturer's instruction manual during installation and use. Our dedicated team will provide you with comprehensive technical support to ensure that you can take full advantage of the features of the product.

Manufacturer: GEFanuc Model: A06B-0063-B203 Drive type: AC servo motor Rated voltage: 200V Rated current: 5.5A Maximum current: 8.2A Speed range: 0-3000 rpm Power: 1.5kW Protection class: IP65 Weight: 5.2kg Size: 165mm x85mm x8 5mm This GEFanucA06B-0063-B203 AC servo motor uses advanced design concepts and technologies to ensure its excellence in the field of industrial automation. It has excellent response speed and stability, and can operate stably in various complex working environments. The interior of the motor is made of high-quality materials, which ensures its long service life and reliability.In addition, its compact design makes it easy to install and maintain, reducing the user's cost of use. Whether it is used for precision machining or high-speed motion control, this servo motor can provide excellent performance to meet the needs of different industries.

Product Type: Ethernet Interface Module Product Model: IC693CMM321-KM Manufacturer: GE General Electric Number of Ports: 3 Module Width: Single Slot Compatible Accessories: AAUI Cable; External Transceiver Voltage Range: 5/12/24 Volts DC GEIC693CMM321 Ethernet Interface Module Controller is designed for industrial automation with efficient and robust network communications.It adopts advanced technology and can adapt to various harsh industrial environments. The module is equipped with three Ethernet ports, supports AAUI cable and external transceiver connection, and is convenient for users to flexibly configure the network. The design of single slot makes the installation more convenient and saves space.In addition, the module has excellent anti-interference ability and high reliability, which ensures long-term stable operation in industrial environment. Whether used in factory automation systems or building control systems, the GEIC693CMM321 delivers outstanding performance.