Technical Specifications Parameter Specification Model LOC 870 Type Limit Switch and Solenoid Valve Enclosure Enclosure Rating NEMA 4X / IP66 (Weatherproof, dust-tight, and corrosion-resistant) Material Fiberglass-Reinforced Polyester or Stainless Steel (depending on variant) Electrical Compatibility Compatible with Fisher limit switches (e.g., LSB/LSC series) and solenoid valves Mounting Designed for direct attachment to Fisher rotary or linear actuators Temperature Range -40°F to 180°F (-40°C to 82°C) (standard) Electrical Connections Conduit openings with sealing glands (e.g., 1/2" NPT) Internal Components - Terminal blocks for wiring - Mounting rails for switches/solenoids - Optional heater/thermostat

Technical Specifications Parameter Specification Model DLC3010 Type Digital Level Controller Input Signals • 4-20 mA analog input • HART protocol compatibility • Discrete inputs for status monitoring Output Signals • Dual 4-20 mA outputs • Relay outputs (configurable for alarm or control) • Digital communication (optional) Control Functions • Proportional (P) • Proportional-Integral (PI) • On-Off control • Pump control/lead-lag Display Backlit LCD for level reading, setpoints, and configuration parameters Power Supply 24 VDC or 100-240 VAC (depending on model variant) Enclosure Rating NEMA 4X / IP66 (for harsh environments) Communication • HART protocol • Optional Foundation Fieldbus or PROFIBUS PA Ambient Temperature -40°F to 185°F (-40°C to 85°C) Mounting Panel mount, DIN rail, or field mounting

Technical Specifications Parameter Specification Model 2052/2 Type Pneumatic Pressure Transmitter Measurement Principle Force-Balance Mechanism Input Pressure Varies by specific configuration (e.g., 0-100 psi, other ranges available) Output Signal 3-15 psi standard pneumatic signal Supply Air Pressure 20-30 psi clean, dry instrument air Accuracy ±0.5% of span (typical for this series) Sensing Element Bourdon tube or diaphragm (depending on pressure range) Case Material Cast aluminum with corrosion-resistant coating Process Connection 1/2" NPT or other standard connections Ambient Temperature -20°F to 140°F (-29°C to 60°C) Enclosure Rating NEMA 4 (weatherproof)

Technical Specifications Parameter Specification Model 2052/1 Type Pneumatic Pressure Transmitter Measurement Principle Force-Balance Mechanism Input Pressure Range Specific range to be verified (e.g., 0-50 psi, 0-200 psi, etc.) Output Signal 3-15 psi standard pneumatic signal Supply Air Pressure 20-30 psi clean, dry instrument air Accuracy ±0.5% of span (typical) Sensing Element Bourdon tube or diaphragm (configuration dependent) Case Material Cast aluminum with corrosion-resistant coating Process Connection 1/2" NPT standard (other connections available) Ambient Temperature -20°F to 140°F (-29°C to 60°C) Enclosure Rating NEMA 4 (weatherproof)

Technical Specifications Parameter Specification Model FV-CT04-PU-8D Type Digital Valve Controller Accessory Package Compatibility Fisher Fieldvue DVC6000/DVC2000 Series Digital Valve Controllers Communication Interface HART Protocol Max Device Connections 8 devices simultaneously Power Supply Built-in rechargeable battery or external power adapter Display Backlit LCD for configuration and diagnostics Enclosure Rating IP54 (Dust and water splash resistant) Operating Temperature 14°F to 122°F (-10°C to 50°C) Communication Ports HART communication terminals, USB (for data transfer)

Technical Specifications Parameter Specification Model R622-DC1 Type Eccentric Rotary Control Valve Valve Body Style Angle Pattern, Flanged Valve Size 2-inch (DN50) - from "62" code Pressure Class ANSI Class 300 - from "62-2" code Actuator Type Pneumatic Spring-Diaphragm - "DC1" configuration Actuator Action Spring-Return (Single-Acting) - Fail-safe (air-to-open or air-to-close) Air Signal 3-15 psig (0.2-1.0 bar) standard Travel Approximately 50° of rotation Flow Characteristic Approximately Equal Percentage - standard for eccentric plug Leakage Class ANSI Class IV (metal seats) or better Temperature Range -50°F to +450°F (-46°C to +232°C) - standard, extendable with special seals

Technical Specifications Parameter Specification Model SVF24000 Type Sliding Stem Control Valve (Globe Style) Valve Size 1/2 inch (DN15) to 2 inch (DN50) - specific size varies by configuration Pressure Class ANSI Class 150 to 300 - depending on body style End Connections Screwed (NPT) or Flanged - configuration dependent Flow Characteristic Equal Percentage or Linear - trim dependent Leakage Class ANSI Class IV (standard metal seats) or Class VI (soft seats) Temperature Range -20°F to +450°F (-29°C to +232°C) - standard Body Materials Carbon Steel (WCB) standard, with stainless steel and other alloys available Trim Materials Stainless Steel standard

Technical Specifications Parameter Specification Model LCC-4 Type Mechanical Liquid Level Controller Measurement Principle Displacer/Buoyancy Principle Control Action Direct-acting or Reverse-acting (configuration dependent) Level Range Standard ranges available (e.g., 12", 24", 36" - specific to application) Process Connection 2-inch NPT standard (other sizes available) Maximum Working Pressure 250 psig (17.2 bar) - standard Temperature Range -20°F to +400°F (-29°C to +204°C) - standard Materials of Construction Chamber: Carbon steel Displacer: Stainless steel Internal Components: Stainless steel Control Output Mechanical linkage to control valve or switch

Technical Specifications Parameter Specification Model PF-67CFR-P275 Type Filter Regulator with Automatic Drain Port Size 1/4" NPT (standard) Maximum Inlet Pressure 300 psig (20.7 bar) Outlet Pressure Range 0-150 psig (0-10.3 bar) adjustable Filter Element 5 micron (standard) Bowl Material Polycarbonate (transparent) Drain Type Automatic float-operated drain Flow Capacity 50 SCFM (85 m³/h) at 100 psig Body Material Die-cast aluminum Temperature Range 35°F to 140°F (2°C to 60°C)

Technical Specifications Parameter Specification Part Number FS-67CFR-601 Description Filter Regulator Mounting Kit Compatible Components Fisher 67CFR Series Actuator Pilots and related pneumatic systems Mounting Type Bolt-on bracket system Kit Contents • Mounting bracket • Bolts and fasteners • Gaskets • Connecting fittings Bracket Material Galvanized steel or stainless steel (corrosion-resistant) Hardware Material Stainless steel (for corrosion resistance) Installation Tool-based assembly requiring standard wrenches