The Schneider Electric Compact NSX is a 100A frame, 3-Pole Moulded Case Circuit Breaker (MCCB). This specific configuration features a 2D thermal-magnetic trip unit (TM-D) providing fixed protection against overloads and short-circuits, set at a 32A rated current.

The Schneider Electric EA9L is a Type 1+2 Combined Surge Protective Device (SPD) with a 2-Pole (L+N) configuration and a maximum discharge current (Imax) of 20 kA per mode. Part of the user-friendly Easy9 range for residential and light commercial applications, it offers primary and secondary surge protection in a single, compact device.

The Schneider Electric EA9L is a Type 1+2 Combined Surge Protective Device (SPD) with a 2-Pole (L+N) configuration and a maximum discharge current (Imax) of 40 kA per mode. Part of the Easy9 range for residential and light commercial applications, it provides primary and secondary surge protection in a single, compact device.

The Schneider Electric EZD is a compact and economical 4-Pole, 100A Moulded Case Circuit Breaker (MCCB). The designation "160E" indicates the frame size (EZD160) and the standard "E" breaking capacity.

The Schneider Electric PRD 40 is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and an enhanced maximum discharge current (Imax) of 40 kA per phase. Designed for high-risk exposure environments, it provides the highest level of primary surge protection at the service entrance against direct or indirect lightning strikes and severe switching transients in low-voltage AC power systems.

The Schneider Electric PRD is a Type 1+2 Combined Surge Protective Device (SPD) with a 3P+N (3-phase + neutral) configuration and a maximum discharge current (Imax) of 20 kA per phase. Designed for installation at the service entrance or main distribution board, it provides the first and main line of defense against direct or indirect lightning strikes and large switching transients in low-voltage AC power systems.

The Schneider Electric EZD is a compact and economical 4-Pole, 400A Moulded Case Circuit Breaker (MCCB). Designed for simplicity and reliable protection in three-phase distribution systems, it provides essential defense against overloads and short-circuits.

The Schneider Electric ABL8 RPM24200 is a programmable digital power meter from the PowerLogic PM800 series. This compact, DIN-rail mounted device is designed for accurate measurement, monitoring, and basic power quality analysis of single-phase or three-phase electrical systems.

The Schneider Electric LC1F500M7C is a heavy-duty industrial contactor from the Tesys F range. It is designed for reliable switching and control of large three-phase motor loads or high-current resistive loads.

The Schneider Electric iC65N is a standard-breaking capacity, 2-Pole, 6A Miniature Circuit Breaker (MCB) with a Type D tripping characteristic. Part of the widely used Acti 9 iC60 series, it is designed to protect circuits with very high inrush currents against overloads and short-circuits.