Key Parameters Category Description / Value Product Line Eaton Inductive Proximity Sensors Series LS-S02 Sensor Type Inductive (detects metallic objects) Sensing Distance 23 mm Housing Material PTFE (Teflon) Housing Size / Thread M30 x 1.5 Mounting Shielded (Flush-mountable) Output Configuration NPN, Normally Open (NO) (as indicated by "ZBZ") Connection 4-pin M12 quick-disconnect connector Rated Operating Voltage Typically 10-30 V DC Output Current Typically ≤ 200 mA Standard IEC 60947-5-2

Key Parameters Category Description / Value Product Line Eaton ETR (Electronic Thermal Relay) Series ETR4 Rated Operational Current (Iₑ) Setting Range 55 - 70 A (Continuously adjustable within this range) Rated Operational Voltage for Main Circuit Up to 690 V AC, 50/60 Hz Power Supply for Electronics AC, sourced from the main current path (Self-powered) Tripping Class Class 10 (Standard tripping characteristic for general motor starting) Protection Functions • Thermal Overload Protection (based on I²t characteristic) • Phase Failure / Unbalance Protection • Jam / Stall Protection (short-time pickup setting) Ambient Compensation Yes (Provides stable performance across a range of ambient temperatures) Standards Compliance IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14 Mounting Snap-on mounting onto compatible Eaton contactors (e.g., DILB, DILM series). Auxiliary Contacts • 1 Normally Closed (NC - 95-96): Trip contact, used to break the control circuit. • 1 Normally Open (NO - 97-98): Alarm contact, can be used for signaling. Test & Reset TEST button to simulate a fault, and STOP/RESET button.

Key Parameters Category Description / Value Product Line Eaton ETS (Time Relays) Series ETS4 Function Star-Delta Changeover (with two independently adjustable times) Adjustable Times • T1 (Star Time): Adjustable range, e.g., 0.05s - 100h • T2 (Pause Time): Adjustable range, e.g., 0.05s - 100h Supply Voltage Wide range, typically 24-240V AC/DC (The exact range must be confirmed by the order code sticker on the device itself). Output Contacts Typically 2 Changeover (CO) Contacts (e.g., 2 NO/NC contacts) with a specific switching capacity. Time Setting Digital via rotary switches or pushbuttons with an LED display. Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Connection Screw terminals or spring-cage terminals. Standards Compliance IEC/EN 60947-5-1

Key Parameters Category Description / Value Product Line Eaton EASY (Smart Relays) Series EASY800 Model / CPU EASY822 Power Supply DC (Typical rating: 24 V DC. Must be verified on the device). Integrated Function PID Temperature Controller (as indicated by "TC") Digital Inputs 12 (The exact number and type - AC/DC sourcing/sinking - depends on the specific -DC variant). Digital Outputs 8 (Typically relay outputs). Analog Inputs 2 for temperature sensors (e.g., thermocouple Type J/K or Pt100/1000). Analog Output 1 for the PID control output (e.g., 0-10V or 0/4-20mA). Programming Via EASY-SOFT software or directly on the device using the built-in display and buttons. Display Integrated LCD for showing values, status, and messages. Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Communication Optional communication modules (e.g., for Ethernet, AS-Interface, IO-Link) can be added.

Key Parameters Category Description / Value Product Line Eaton NZM2 Accessories Compatible Breakers NZM2 Motor Protection Circuit Breakers (e.g., NZM2-XV... series) Function Analog Setting Digitization Module Input Reads the physical position of the breaker's analog setting potentiometers. Output Digital data representing the breaker's current settings. Communication Interface Typically a System Interface (SI) or other proprietary digital bus used by Eaton's control systems (e.g., for integration with Eaton's XV-SI system interface modules). Mounting Designed to be mounted directly onto the compatible NZM2 breaker. Purpose • Setting Read-back: Allows a control system to read the actual protection settings configured on the breaker. • Condition Monitoring: Verifies that the settings have not been manually changed without the control system's knowledge. • Documentation: Provides digital documentation of protection parameters.

Key Parameters Category Description / Value Product Line Eaton DILM Accessories Compatible Contactors DILM32 Series Module Type Timer Module Timer Function Star-Delta Changeover (with adjustable time delay) Power Supply Derived from the main contactor coil circuit. Mounting Snap-on mounting directly onto the compatible DILM32 contactor. Connection Integrated connection via the snap-on mechanism; no external wiring required for power. Standards Compliance IEC/EN 60947-4-1, UL 508, CSA C22.2 No. 14

Key Parameters Category Description / Value Product Line Eaton EASY (Smart Relays) Series EASY600 Model / CPU EASY621 Power Supply DC (Typical rating: 24 V DC. Must be verified on the device). Integrated Function PID Temperature Controller (as indicated by "TC") Digital Inputs 8 Digital Outputs 6 (Typically relay outputs). Analog Inputs 2 for temperature sensors (e.g., thermocouple Type J/K). Analog Output 1 for the PID control output (e.g., 0-10V or 0/4-20mA). Programming Via EASY-SOFT software or directly on the device using the built-in display and buttons. Display Integrated LCD for showing values, status, and messages. Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Communication Optional communication modules (e.g., for Ethernet, AS-Interface, IO-Link) can be added.

Key Parameters Category Description / Value Product Line Eaton EASY (Smart Relays) Series EASY500 Model / CPU EASY512 Power Supply DC (Typical rating: 24 V DC. Must be verified on the device). Digital Inputs 8 Digital Outputs 4 (Relay Contacts - as indicated by "RC"). Output Type Relay (Electromechanical) - Can switch AC or DC loads within rating. Programming Via EASY-SOFT software or directly on the device using the built-in display and buttons. Display Integrated LCD for showing values, status, and messages. Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Communication Optional communication modules (e.g., for Ethernet, AS-Interface, IO-Link) can be added.

Key Parameters Category Description / Value Product Line Eaton EASY (Smart Relays) Series EASY800 Model / CPU EASY820 Power Supply DC (Typical rating: 24 V DC. Must be verified on the device). Digital Inputs 12 Digital Outputs 8 (Relay Contacts - as indicated by "RC"). Output Type Relay (Electromechanical) - Can switch AC or DC loads within rating. Programming Via EASY-SOFT software or directly on the device using the built-in display and buttons. Display Integrated LCD for showing values, status, and messages. Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Communication Optional communication modules (e.g., for Ethernet, AS-Interface, IO-Link) can be added.

Key Parameters Category Description / Value Product Line Eaton EASY (Smart Relays) Series EASY800 Model / CPU EASY819 Power Supply AC (Common ratings: 120V AC or 230V AC. Must be verified on the device). Digital Inputs 12 Digital Outputs 8 (Relay Contacts - as indicated by "RC"). Output Type Relay (Electromechanical) - Can switch AC or DC loads within rating. Programming Via EASY-SOFT software or directly on the device using the built-in display and buttons. Display Integrated LCD for showing values, status, and messages. Mounting Snap-on mounting on 35 mm top-hat rail (DIN rail). Communication Optional communication modules (e.g., for Ethernet, AS-Interface, IO-Link) can be added.