The Weidmüller EBB 25-50/16 AM is a robust potential distributor terminal with screw connection technology. It is made of brass and is designed for mounting on a TS 35 rail . This terminal block allows for the creation of a decentralized equipotential bonding system.

The EPAK-PCI-CO is a compact analog signal isolator from Weidmüller's EPAK series. It safely isolates, converts, and monitors analog signals, with configuration performed via DIP switches on the device. This model is designed for applications that do not require international approvals but demand high interference resistance.

The ACT20X-2HTI-2SAO-S is a 2-channel Ex signal isolating converter from Weidmüller. It transmits analog signals from RTD, thermocouple, and 0/4...20 mA sources from hazardous areas (up to Zone 0) to the safe area with 3-way galvanic isolation. The module supports SIL 2 functional safety per IEC 61508 and is configured via FDT/DTM software .

The Weidmüller VDATA CAT6 (Order No. 1348590000) is a modular surge arrester for DIN rail mounting. It is specifically designed to protect up to Cat.6 (Class E) data transmission lines operating at frequencies up to 250 MHz.

Weidmüller VPU AC II 1 300/50 (Part No. 2591020000) is a DIN rail mounted Type 2+Type 3 combined single-phase AC surge protective device, specially designed for low-voltage distribution systems to protect electrical equipment from transient lightning surges and switching overvoltage damage.

Weidmüller ACT20X-2HAI-2SAO-P is a 2-channel intrinsically safe HART transparent signal isolator, designed for hazardous area process automation applications. It achieves galvanic isolation between intrinsically safe Ex field side and safe control side, safely transmitting 4–20mA analog current signals from Zone 0/1 hazardous areas to DCS/PLC systems in safe zones, while supporting bidirectional transparent HART protocol communication for smart transmitter parameter configuration and diagnosis

Weidmüller ACT20P-CI2-CO-OLP-S is a DIN rail mounted 2-channel passive galvanic signal isolator, loop-powered via the output 4–20mA current loop without separate auxiliary power supply. It realizes electrical isolation for two-channel standard 4–20mA analog current signals, effectively eliminating ground loop interference, protecting PLC and DCS control equipment from surge voltage and electromagnetic noise.

Weidmüller PRO MAX 480W is a high-efficiency DIN rail mounted single-phase switching power supply, designed for industrial automation control cabinets, PLC systems, machinery, transportation and harsh industrial environments.

Weidmüller RS SD25 BZ (Part No. 8537380000) is a DIN rail mounted D-Sub interface transfer module complying with IEC 60807 / DIN 41652 standards. It is equipped with a 25-pin female D-Sub connector on the control side and spring clamp terminal blocks on the field wiring side, which realizes quick signal conversion between PLC D-Sub cables and on-site equipment wiring.

Weidmüller RSF20 is a 20-pole DIN rail mounted interface terminal module, compliant with IEC 60603-13 / DIN 41651 standard. It adopts IDC flat ribbon cable connector on one side and screw-type terminal blocks on the other side, realizing convenient signal conversion between PLC ribbon cable and field wiring.