DG4V-5-2CJ-M-U-H6-20
Parameter Description / Value Notes
Product Line Eaton DG4V Second Generation
Type Proportional Directional Control Valve 4-way, 3-position, Single-Stage
Porting Size NG05 (CETOP 5 / NFPA D02) Standard subplate interface
Maximum Operating Pressure 350 bar (5,075 psi)
Maximum Flow Rate Approx. 40 - 60 L/min (10.5 - 16 US gpm) *Dependent on spool and pressure drop (e.g., Δp = 10 bar).*
Spool Type 2CJ "2" denotes a specific high-performance spool series with LVDT feedback. "CJ" indicates a linear or modified linear flow characteristic.
Center Position M (Closed Center / All Ports Blocked) In the center (neutral) position, all work ports (A, B) and the pressure port (P) are blocked, and the tank port (T) is open. This holds an actuator in place.
Solenoid Type Proportional Solenoid Wet armature design
Feedback Type Integrated LVDT The spool has a built-in LVDT for closed-loop position control.
Electrical Connector U (DIN 43650 Form A, 4-pin) Standard industrial connector
Integrated Electronics H6 On-board amplifier card designed for LVDT feedback valves.
Input Signal ±10 VDC or 4-20 mA Selectable via internal dip-switches
Supply Voltage (to amplifier) 12-30 VDC For the H6 amplifier
IP Rating IP65 (with connector properly installed) Dust-tight and protected against water jets
Hydraulic Fluid Mineral-based hydraulic oil to ISO 11158
Fluid Viscosity Range 10 to 400 cSt (50 to 2000 SUS)
Operating Temperature Range -20°C to +70°C (-4°F to +158°F)
3G3RX-A4022-Z Safety Light Curtain | F3SJ Series Industrial Safety Sensor
The Omron 3G3RX-A4022-Z is a high-performance vector control inverter from the SYSDRIVE 3G3RX Series. As the successor to the 3G3RV series, it is designed for demanding motor control applications requiring high precision, exceptional starting torque, and reliability.